April 17, 2024
Getting Victony WiFi Extender Red Light Let’s Fix It Now!

Getting Victony WiFi Extender Red Light Let’s Fix It Now!

Despite performing Victony WiFi extender setup in a proper way, it is still giving issues. And, one of the most common issues that millions of users are experiencing is “Victony WiFi extender red light” issue. If you are also getting the same issue, then be happy because we are here to help you.

Here, in this post, we have provided the topmost hacks following which you can easily resolve “Victony WiFi extender red light” issue. Read on!

Fixed: Victony WiFi Extender Red Light

  1. Reboot Your Victony WiFi Extender

This is one of the simplest hacks tried by many users across the globe and they have also got a fix for many extender-related issues. You also try rebooting your Victony WiFi extender. If you don’t know the process to reboot your Victony WiFi extender, go through the instructions provided below:

  • Turn off your Victony WiFi extender by unplugging it from its electrical outlet.
  • After unplugging the extender, wait for some time.
  • Now, you can plug in your Victony WiFi extender back into its respective wall socket and turn it on.

Note: You have to disconnect your Victony WiFi extender from your router, PC, laptop, mobile phone, baby monitors, Alexa devices, etc. (if they are connected).

Now, check if Victony WiFi extender red light” issue is fixed. Just in case it hasn’t, don’t delay much to try the next hack provided below.

  1. Check the Ethernet Source

In the next fix, we suggest you check the Ethernet cable connecting your Victony WiFi extender and router. There is a possibility that the cable you have used for connecting them is worn out or damaged. For fixing the issue, it is recommended that you either replace the cable or connect your extender and router wirelessly.

  1. Place Your Extender and Router Closer

A secure connection (wired or wireless) connection between your Victony WiFi extender and router is very important. But, distance between them matters a lot as well.

If you have placed your Victony WiFi extender and router at a distance, consider placing them closer. Ensure to place them in the same room. Also, router’s WiFi signals are very important for your Victony WiFi extender to perform well. Make sure, not to place your router inside a cabinet.

  1. Update Victony WiFi Extender Firmware

It seems like after doing Victony setup you haven’t update the firmware on it yet. If so, then you have got the reason behind getting “Victony WiFi extender red light” issue. Don’t worry! It hasn’t delayed yet! Just update the firmware of your Victony WiFi extender now by visiting its official site and applying the provided instructions.

Once the firmware gets updated successfully, the issue will surely go away.

  1. Reset Your Victony WiFi Extender

If even after following the above-mentioned troubleshooting hacks, you are not able to fix “Victony WiFi extender red light” issue, consider resetting it back to factory default values.

Here is how you can reset your Victony WiFi extender to the factory default values:

  • First of all, look for the reset hole on your Victony WiFi extender.
  • Take a pin-like object like paper clip, pin, toothpick, or hairpin. Oil pin will also work.
  • Insert the object into the Victony WiFi extender reset hole, hold it for a few seconds, and release it.

The LEDs on your Victony WiFi extender will start flashing green. As soon as they become stable, set up Victony WiFi extender again. A proper configuration is the permanent fix for “Victony WiFi extender red light” issue.

Set Up Victony WiFi Extender via WPS

Victony WiFi extender setup via WPS is one of the easiest methods to perform. All you have to do is to press the WPS button on your Victony WiFi extender and then on your router, and in blink of an eye, your Victony WiFi extender will be configured. But, ensure that your router too has the WPS button on it. If not, perform Victony WiFi extender setup process using the manual method.

To Sum Up

With that, our article to troubleshoot “Victony WiFi extender red light” issue has reached the successful end. Anticipating that after going through the aforementioned tested and proven hacks, you will able to stop the red light to blink on your Victony WiFi extender.

Wishing you all the best and happy experience with Victony WiFi extender!