Netgear Extender Not Connecting to Router [Quick Fixes]

Users often get tired and give up when their Netgear extender fails to connect to the router. The reason being, this problem halts them from accessing the Netgear extender login window and makes changes to the devices’ configuration. However, it is not a situation to give up. Instead, it should be faced and resolved. If you too are somehow struggling with the Netgear extender not connecting to router problem, then you should read nothing more than this post. Here, we have put all the necessary hacks that will help you get the issue fixed like a professional. Stick to reading.

Resolved: Netgear Extender Not Connecting to Router

We want to inform you that the above-mentioned hacks will only work if you’ve followed the Netgear extender setup instructions carefully. Otherwise, you will be left with no option other than the extender’s reconfiguration.

Tip 1: Use an Intact Ethernet Cable

Let’s start the troubleshooting process by checking the source holding a direct connection between your Netgear device and the router. Is it non-damaged? If it is not, then it is time that you disenchant yourself from your worn-out Ethernet cable. The reason being, it is not serving any purpose instead than dragging you to the Netgear extender not connecting to router issue. Thus, throw it away and use a new one in its place. However, the new Ethernet cable connection you establish must be strong. Checking the Ethernet ports is also your responsibility as the problem might occur due to a non-working network port too.

Tip 2: Get Closer to Your Router

The connection issue between your Netgear extender and router might also trouble you if both devices are in two distant corners of the apartment. In this situation, the communication between both devices breaks and their signals refuse to communicate. Therefore, to fix the Netgear extender not connecting to router issue, you have to take the step of cutting off the distance separating both devices. However, cutting off the distance doesn’t mean that you can make the distance zero. The distance’s value should be so that the signals of your devices don’t put you in other trouble due to their clash.

Tip 3: Reboot the Extender

After mending the distance between your WiFi devices, try to access mywifiext.net to check if the extender-router connection has become successful. In case you’re unable to do so, then there’s a possibility that the occurrence of a technical glitch has forced the Netgear extender not connecting to router issue. So, consider rebooting your device as a part of the process of resolving technical glitches. Worry not! It’s not gonna cause harm to your extender. Instead, it will act as a catalyst and provide a boost to the troubleshooting process you’re following.

Tip 4: Change the Extender’s Location

If you still haven’t got success in establishing a successful connection between your WiFi devices, then this evil play might have happened due to the improper selection of the extender’s location. Didn’t you consider the WiFi interference-creating factors before placing your Netgear device? Well, you can still count them. Have a look at the surroundings of your extender and see if it is encircled by devices emitting radiowave frequencies. If it is, then you need to change the location of your WiFi device right away. In addition, ensure that the newly selected location does not consist of objects carrying a large amount of water, reflexive surfaces, and metal objects. Furthermore, the placement of the Netgear extender should be avoided near concrete walls.

Tip 5: Remove Extra Devices

The extender’s denial of the connection with the main router might also be an outcome of the exceeded number of devices accessing your Netgear network. Chances are that your extender’s network is being accessed by so many devices that there’s no space left for the router to share the connection. In that scenario, we want you to remove all unnecessary devices accessing your extender. Remember that you won’t be able to access the internet on them until you resolve the Netgear extender not connecting to router issue.

Summing Up

With Tip number 5, we wrap up the post discussing the troubleshooting techniques to resolve the Netgear extender not connecting to router problem. Although we are hopeful that these tips will suffice for you to get the issue fixed, on the off chance they don’t, remember what we said at the beginning of the troubleshooting process. Thus, you are left with the only option of reconfiguring the extender via the 192.168.1.250 IP address. However, we would like to tell you that the extender’s reconfiguration will be possible only if you reset the extender to the default factory mode. After that, the issue will be resolved automatically.